Fender Pure Vintage Bass String Guide, Nickel види поголемо

Fender Pure Vintage Bass String Guide, Nickel

0994913000

Нов производ

Pure Vintage Parts
Many of Fender’s Pure Vintage parts are crafted where possible on the same tooling and machinery as our original-era Fender parts. Whether you are personalizing, modifying or restoring, there is no better way to maintain the proud heritage and period-correct accuracy of your classic Fender instrument or amp.

FEATURES
Plated-steel single-disc string guide (string tree)
Minimizes tuning problems and sympathetic overtones caused by low string tension over the nut
Includes string guide and slotted mounting screw
Used on vintage and modern Jazz Bass® and Precision Bass® guitars
Designed to fit most vintage and modern bass guitars

Повеќе детали

на залиха

700 MKD

Додади на мојата листа на желби

повеќе инфо

Pure Vintage Parts
Many of Fender’s Pure Vintage parts are crafted where possible on the same tooling and machinery as our original-era Fender parts. Whether you are personalizing, modifying or restoring, there is no better way to maintain the proud heritage and period-correct accuracy of your classic Fender instrument or amp.

FEATURES
Plated-steel single-disc string guide (string tree)
Minimizes tuning problems and sympathetic overtones caused by low string tension over the nut
Includes string guide and slotted mounting screw
Used on vintage and modern Jazz Bass® and Precision Bass® guitars
Designed to fit most vintage and modern bass guitars

Производител Фендер
Вид Хардвер
Намена За Бас Гитара

поврзани производи

‹ ›
Во Кошничка

The EVH D-Tuna is a revolutionary device that lets you to drop from E to D and back, in an instant!. It is made from the highest quality hardened steel. The patented design allows for precise fine-tuning adjustment, is simple to set up, easy to use and really works! The EVH D-tuna was designed to adapt to a double-locking tremolo, such as a Floyd Rose® or...
3,650 MKD
брз преглед
на залиха
Во Кошничка

Fender original input jack (or output jacket one could also say ...). Fits all Fender guitars, but also most other makes. Standard mono jacket.
500 MKD
брз преглед
на залиха
Во Кошничка

This pickguard fits American, American Standard, American Vintage, Standard and Deluxe series Precision Bass models (does not fit five-string Precision models).FEATURES13 mounting screw holesTruss rod notchNo vintage-style thumb rest or pickup cover screw holes
2,300 MKD
брз преглед
на залиха
Во Кошничка

Add a coil tap or phase switch to your guitar without having to drill extra holes. This standard 250K potentiometer has the added feature of a push-pull double-pole/double-throw switch. Simply pull up on the knob to engage the switch. Includes mounting hardware.
1,000 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSFour-position blade pickup selector switch lets you easily change Telecaster pickup wiring from series to parallel for increased output and fatter tone. Used on many Custom Shop instruments.FEATURESFour-position blade pickup selector switchBlack "barrel" tip for a TelecasterMounting hardware included
1,500 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSFive-position blade pickup selector switch for use on most American, American Standard, American Special, Standard and Deluxe series Stratocaster guitars. Includes white and black switch tips (one of each). Mounting hardware included.FEATURESFive-position blade pickup selector switchWhite and black switch...
1,000 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTS6-Saddle Hardtail Classic/Standard Series Bridge Assembly (Chrome) FEATURESChrome hard-tail bridge assemblyString-through-body designSix stamped saddlesMounting hardware not includedFor Classic and Pawn Shop series instruments
1,600 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSVintage-style six-saddle bridge assembly for use on American Vintage series and Deluxe Nashville Telecaster guitars. Includes string-through-body plate, six nickel-plated "barrel" saddles, mounting hardware and adjustment wrenches. FEATURESVintage-style six-saddle bridge assemblyString-through-body designSix...
3,500 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of four long (5/16") and eight short (1/4") hex set screws used for saddle-height adjustment on American and American Standard series Stratocaster and Telecaster guitars manufactured from 1986-2007.FEATURESSet of 12 hex set screwsFour long screws (5/16")Eight short screws (1/4")For American and American...
400 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSComplete set of 12 1/4" bridge saddle height-adjustment screws for use on American series and American Standard series guitars manufactured from 1986-2007. Note that American series guitars manufactured from 1986-2007 use saddle-height screws of two different lengths; longer 5/8" screws for the "B" and high...
400 MKD
брз преглед
на залиха
Во Кошничка

Avoid accidents by using Fender® Strap Locks. Special strap buttons for the guitar and special locks for the strap keep your favorite guitar or bass safe and secure.Package includes two strap buttons and mounting screws. Strap locks are not included. Gold kit also includes two black and two white felt washers.
400 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSHigh-quality Micarta (synthetic bone) pre-slotted string nut for use on American Standard Precision Bass and other U.S.- and Mexico-made basses with 9.5"-radius fingerboards. Note that some filing and shaping modifications may be required to ensure proper fit and performance.FEATURESMicarta string nut for...
650 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of 12 tremolo arm springs for use with American, American Vintage, American Standard, Classic, Deluxe and Road Worn® series Stratocaster models. FEATURESSet of 12 tremolo arm springsFor a variety of Stratocaster models
600 MKD
брз преглед
на залиха
Во Кошничка

Genuine Fender American Standard / American Deluxe Stratocaster / American Elite saddle screws to adjust intonation. Also used on American Standard hard tail bridges.  Machine pan head 4-40 x 5/8″. Black pack of 12.
100 MKD
брз преглед
на залиха
Во Кошничка

-Fender® helps you wear it well with vintage-style strap buttons for a variety of electric guitars and basses.-Package contains two nickel-plated steel strap buttons, felt washers, and mounting screws.-Used on American and American Standard Series (US) instruments manufactured from 2004-Present.
400 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSFor use on American Standard, American Deluxe and some Custom Shop guitars, this 1/8" American Standard truss rod nut helps keep electric guitar and bass necks straight and true.FEATURES1/8" hex truss rod nutFor most modern U.S.-made electric guitar models
500 MKD
брз преглед
на залиха
Во Кошничка

Some of our most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models. Package contains four 4-40 X 3/8" (short) and eight l4-40 X 5/16" (long) hex set screws used for saddle height adjustment on American Vintage Series Stratocaster® and Telecaster® bridges.
450 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of three compensated brass bridge saddles for use on vintage-style three-saddle Telecaster bridges (does not fit standard six-saddle Telecaster bridges). Set includes saddles, intonation springs, slotted intonation screws and saddle-height adjustment screws. FEATURESSet of three compensated brass bridge...
2,000 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.FEATURESSet of five nickel-plated steel tremolo tension springsFor American Vintage series and Custom Shop instruments
850 MKD
брз преглед
на залиха
Во Кошничка

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSingle truss rod nut with 5/16" Allen adjustment for use on Zone Bass™, Highway One™, Dimension® Bass and Standard series basses manufactured from 1998-present. FEATURESSingle truss rod nut5/16" Allen adjustmentFor Zone Bass™, Highway One™, Dimension® Bass and Standard series basses (1998-present)
500 MKD
брз преглед
на залиха