Original saddle pads, plasticFor Pro Arte and Pro Natura

Genuine replacement parts for your Fender® instrument. Package of twelve black metal screws used to fine tune a string on a Floyd Rose® tremolo system.Can be used with any Fender® instrument using a Floyd Rose® Original Tremolo assembly.

Beveled endSet of 6 pieces. Price per setPlastic, PVC

GENUINE FENDER S-1 KNOB (1) FOR STRATOCASTERDoes not include plastic push-on knob and button cap designed to be used with an S-1 switch.Fits 1/4" split shaft controlsThe S-1 switch can be retrofitted to nearly all Stratocaster models (US & Mexico) produced from 1954-presentAGED WHITEFender Part #: 005-9267-030

Frame for Humbucker, for a flat topboard 88.5 x 44.6 mmBridge position, diagonal, height 8.9 x 10.8 mm

Frame for Humbucker, for a flat topboard 88.5 x 44.6 mmBridge position, diagonal, height 8.9 x 10.8 mm

Potentiometer Cover 6mmprice per itemCylindrical form, Speed ​​Knob

To help keep the neck of your contemporary electric guitar or bass straight and true, Fender® offers truss rod nuts that fit most modern instruments.Package includes two truss rod nuts. 3/16" hex (Allen) adjustment.Used on Deluxe Player Strat®, Toronado®, Cyclone, '72 Tele® Custom, '70s Classic Series Strat/Jazz Bass®, Road Worn® Player Strat®/Tele®, Pawn...

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of two tremolo arm tips for use with most American, American Standard, American Vintage, Classic Player and Artist series Stratocaster models. FEATURESSet of two tremolo arm tipsFor a variety of Stratocaster models

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of 12 nickel-plated Allen set screws (6-32x7/16") used for saddle-height adjustment on American Special and Standard series basses.FEATURESSet of 12 nickel-plated Allen set screws (6-32x7/16")For saddle-height adjustment on American Special and Standard series basses

-Fender® helps you wear it well with vintage-style strap buttons for a variety of electric guitars and basses.-Package contains two nickel-plated steel strap buttons, felt washers, and mounting screws.-Used on American and American Standard Series (US) instruments manufactured from 2004-Present.

Fender Bridge Section Single Groove

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSFor use on American Standard, American Deluxe and some Custom Shop guitars, this 1/8" American Standard truss rod nut helps keep electric guitar and bass necks straight and true.FEATURES1/8" hex truss rod nutFor most modern U.S.-made electric guitar models

DescriptionGenuine Fender American Standard P-Bass pre-slotted nut. “Bone” colored Micarta.

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of three plastic push-on control knobs designed to fit 1/4" split-shaft potentiometers on nearly all U.S.- and Mexico-made Stratocaster models manufactured from 1954-present.FEATURESSet of three plastic push-on control knobsDesigned to fit 1/4" split-shaft potentiometersFor most U.S.- and Mexico-made...

Need to replace a missing knob? Fender® has what you need straight from our U.S.-made instruments. Set of three plastic push-on knobs designed to fit 1/4" split shaft controls. Fits nearly all Stratocaster® models (US and Mexico) produced from 1954-Present.

Genuine Jackson Bridge Saddle (1) For E Strings - Black, 006-2591-000

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments...

Set of three Fender® Stratocaster® pickup covers. Made for Fender and used on a variety of vintage and contemporary models.Replacement plastic pickup covers will not fit SCN™, N3™, or Noiseless™ pickups.

Chrome-plated tremolo arm with aged white tip, for use on most Mexico-made Standard series models manufactured before 2006.FEATURESChrome-platedAged white tipFor Mexico-made Standard series models manufactured (pre-2006)

REPAIR AND RESTORATION: FENDER GENUINE SPARE PARTSCut waistband wire for 24 jumbo guitar frets, prefabricated for fretboards with a radius of 12".PARTICULARITIES24 cut guitars Jumbo FretsMatched to fingerboards with 12" radiusHeight .055" Width .090"

Acoustic guitar70 x 2.7 x 2.8 mm (L x W x H)Removal field 59 mm

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSStandard bass guitar fret wire pre-cut into 24 pieces and pre-radiused to 9.5". FEATURES24 pre-cut standard frets for 4-string bass fingerboardsPre-radiused to 9.5"Each piece .046" tall and .103 wide

Add a coil tap or phase switch to your guitar without having to drill extra holes. This standard 250K potentiometer has the added feature of a push-pull double-pole/double-throw switch. Simply pull up on the knob to engage the switch. Includes mounting hardware.

FENDER GENUINE PARTS TO REPLACE, REPAIR AND RESTOREVintage three-position pickup selector switch for use on most American Standard, American Special, Standard and Deluxe Stratocaster and Telecaster guitars. Includes white knobs for Stratocaster and black for Telecaster.

Fender white 'ribbed' barrel knobs, as found on early cream Tolex '60s pre-CBS amps, white indicator line, set screw fixing to standard 1/4" solid shaft amp and guitar pots. These look identical to the original knobs, perfect for restoring older Fender.

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSNeck plate stamped with "Fender® Corona California," for use on most Fender basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included. FEATURES4-bolt mountStamped "Fender® Corona, California"Mounting screws includedFor most Fender basses using four-screw neck mounting...

OUTSTANDING AND CONSISTENT PERFORMANCEGT-12AT7 tubes pass every Groove Tubes premium certification for microphonics, hum, physical characteristics and function. Quite simply the best 9-pin triode preamp tubes you can buy — specifically designed and tested for musical instrument amplification and standard equipment on Fender® amps. Outstanding and...

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTS6-Saddle Hardtail Classic/Standard Series Bridge Assembly (Chrome) FEATURESChrome hard-tail bridge assemblyString-through-body designSix stamped saddlesMounting hardware not includedFor Classic and Pawn Shop series instruments

VINTAGE TUBE TONEEvery Groove Tubes product receives premium certification for microphonics, hum, noise floor, physical operation and characteristics. Specifically designed and tested for musical instrument amplification applications as noted.FEATURESLow-output rectifier tube originally used in early low-power Fender amps with tube rectifiers (Champ,...

Features four "stages" and can be wired into a variety of configurations (SPST, DPDT for a coil-tap, or 4PDT for a dual hum bucking coil tap)Works well in conjunction with a Stratocaster 5-Position "Super" Switch250K split shaft designAccepts push-on mounting knobs only

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSOne of the easiest ways to change the look of your Fender instrument is to replace the pickguard. This pickguard fits American, American Standard, American Deluxe, American Special, Highway One™, Road Worn®, Deluxe Player, Blacktop, Standard, Deluxe and Modern Player series Stratocaster guitars with three...

Genuine Gretsch Electromatic Series three on a side chrome plated tuning machine set. Open back tuners nicely manufactured in Asia. Complete with press fit headstock bushings and mounting screws. Mounts to back of headstock with two screws.

Genuine Fender Mint, 3-Ply, 11 Hole Pickguard, For 1-Humbucker and 2-single coil pickups (Lone Star / Fat Strat). This three-ply black pickguard fits HSS Stratocaster models, including most American, American Standard, Hot Rod, American Deluxe, Lonestar, Fat Strat®, Standard, Deluxe and Classic Series '70s models. Note that pickguard has three...

UNLEASH THE BEASTAdd sustain, resonance and improved attack without significantly altering your tone when you add this precision manufactured HiMass bridge to your 5-string bass. The brass base and saddles impart warm, authentic vintage-style tone with .72" string spacing for a familiar playing feel. Precision manufactured as a direct drop-in replacement...

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSSet of four vintage-style chrome-plated tuning machines for use on Highway One™, American Special, American Deluxe, Blacktop™ and Standard series basses. FEATURESSet of four vintage-style chrome-plated tuning machinesIncludes bushings and mounting screwsFor Highway One™, American Special, American Deluxe,...

HOT ROD, HIGH POWER DESIGN6L6 tubes are medium-output power tubes often used in Fender® professional amplifiers including the Bassman®, Bandmaster®, Concert, Dual Showman®, Hot Rod™ Series, Pro Series, Super Reverb®, Tremolux™, Twin, Vibrolux®, Super-Sonic™, Blues Deluxe™, Blues DeVille™ and others. Their response is round, with a pronounced midrange...

Innovative Acoustic Pickup from FenderThe Cypress Acoustic Pickup from Fender was designed by pickup guru Tim Shaw to bring a fresh sound to your amplified acoustic tone. It is designed with a proprietary ceramic magnet and boasts a Field Diffuser feature, which tempers the magnetic field around the treble strings, delivering a beautifully rich high end...

REPLACE, REPAIR AND RESTORE—GENUINE FENDER PARTSIndividual die-cast/sealed tuning machines for use on Highway One™, Blacktop™, Standard, Toronado® and Standard Fat Strat® models manufactured from 2003-present. Mounting hardware not included. FEATURESIndividual die-cast/sealed tuning machines set of 6Two-pin mountingMounting hardware not included

Genuine Fender ASM HB Special Humbucker -black – 4 conductor lead –  includes mounting screws & springs

Genuine Gretsch 0485CA Nickel AOM Bridge Assy with Ebony Base. Bas has factory drilled pin holes.

Gretsch acoustic magnetic sound hole pickup. Reproduces the true sound of the instrument, with no "quack" like a piezo pickup. Easily mounts to most acoustic guitars. Can be permanently mounted by an authorized technician.The new Deltoluxe pickup is inspired by the original DeArmond Rhythm Chief 1000, with fusion ingredients from a couple other vintage...

The Jensen 'C' Series provides pristine vintage tone coupled with the cost and weight advantages of ceramic magnets. Originally developed in the 1960s to meet the ever increasing demands of the emerging pop music industry, the 'C' Series has remained influential ever since. 4/8/16 ohms.

REPLACEMENT TUBES FOR SHOWROOM-NEW PERFORMANCEA medium-output power tube (generally 20-25 watts) often used in Fender® professional amplifiers including the Bassman®, Bandmaster®, Concert, Dual Showman®, Hot Rod™ Series, Pro Series, Super Reverb®, Tremolux™, Twin, Vibrolux®, Super-Sonic™, Blues Deluxe™, Blues DeVille™ and others. Available in many...